| |
- The PowerPlus™ Connector Strip shall be an extruded 0.125” aluminum wireway with interlocking cover
sections for strength with length specified as per job requirements. Dimensions shall be 4-5/8” high x 3-3/16” deep.
- The PowerPlus™ Connector Strip shall have a baked enamel paint finish in black, with outlets identified by 2”
white die-cut labels.
- Terminal blocks shall be DIN rail mounted screwless “cage clamp” type. The terminal compartment for six
circuits or less shall be in the wireway itself with a removable access panel. A code gauge steel welded
junction box shall be provided for seven circuits or more.
- The PowerPlus™ Connector Strip shall accomodate
 Listed outlets ranging from 20-100 Amps, 240VAC
maximum. Outlets may be flush mounted to the cover or on 18” 12/3 S00W-A extra hard usage pigtails.
Wire mesh grips shall be available for the pigtails as an option.
- The PowerPlus™ Connector Strip shall accommodate DMX512 Daisy Chain, DMX512 for Opto Splitter or
10 base T ethernet wiring. Data wiring shall be separated from power wiring with a metal barrier. DMX512
wiring shall have Neutrik® Black/Gold input and output connectors. Ethernet wiring shall have Neutric
Ethercon® extra heavy duty shrouded jacks.
- The PowerPlus™ Connector Strip shall be supplied with hanging hardware (cat. #541S) to accommodate a
single 2” maximum O.D. pipe. One hanger shall be provided for each 5’-0” of strip length. Hanging
hardware (cat. #541D) to accommodate two 2” max O.D. pipes may be provided as an option.
- The PowerPlus™ Connector Strip shall be Listed for use in the United States and Canada.
|
